www.PNWJeep.com
http://www.pnwjeep.net/forum/

elbe 9/6/15
http://www.pnwjeep.net/forum/viewtopic.php?f=6&t=37989
Page 1 of 1

Author:  Carlitos [ Mon Sep 07, 2015 8:13 am ]
Post subject:  elbe 9/6/15

me, greenjeepjohn,thersgoesmike met up at the staging area. the staging area was full of wheeler s from other clubs. we headed out on main line ran all the trails except the busy. the rocks were slippery and muddy.so we decided to do the swamp trail. that's where the fun began went threw a couple of mud holes john folled me but was denied ,he gave it a couple tries did the skinny pedal, and pushed his skid plate back which bent the piece of sheet metal that covers the bottom of transmission ,so he had to remove it after that we headed out over all we a great time .need to get back out there soon. heres a couple pic. i took

Attachments:
2015-09-06 15.27.50.jpg
2015-09-06 15.27.50.jpg [ 225.57 KiB | Viewed 3354 times ]
2015-09-06 13.51.15.jpg
2015-09-06 13.51.15.jpg [ 298.49 KiB | Viewed 3354 times ]
2015-09-06 10.11.27.jpg
2015-09-06 10.11.27.jpg [ 349.32 KiB | Viewed 3354 times ]
2015-09-06 10.11.52.jpg
2015-09-06 10.11.52.jpg [ 210.16 KiB | Viewed 3354 times ]

Author:  Carlitos [ Mon Sep 07, 2015 8:52 am ]
Post subject:  Re: elbe 9/6/15

https://vimeo.com/138539866

Sent from my SCH-I435 using Tapatalk

Author:  theremikegoes [ Mon Sep 07, 2015 11:09 am ]
Post subject:  Re: elbe 9/6/15

Thanks for leading us around Carlos, here are some my wife took. John picked up a pretty good sized friend(log) and I got high centered and had to break in the new winch for all of a few seconds.

Image
Image
Image
Image
Image
Image
ImageImage

Author:  theremikegoes [ Mon Sep 07, 2015 3:13 pm ]
Post subject:  Re: elbe 9/6/15

Image

Author:  MikeM [ Mon Sep 07, 2015 3:44 pm ]
Post subject:  Re: elbe 9/6/15

Nice! ! :thumbsup:

Author:  2KXJ [ Mon Sep 07, 2015 4:47 pm ]
Post subject:  Re: elbe 9/6/15

Sloppy! :thumbsup:

Author:  greenjeepjohn [ Tue Sep 08, 2015 11:59 am ]
Post subject:  Re: elbe 9/6/15

Had a great time. My 33's wasn't enough to get me through the mud hole. So I went around and hit the bottom of my jeep between the oil skid and tranny skid coming off an embankment which put a slight bend on the cover plate to rattle against the flywheel. Got home and straightened it , put back in and good as new.

Author:  theremikegoes [ Tue Sep 08, 2015 4:47 pm ]
Post subject:  Re: elbe 9/6/15

Good to hear John...

Realized that last video didn't upload right, had to resize to get it to come through-sorry its tiny! :mrgreen:

Image

Author:  Horus [ Tue Sep 08, 2015 7:27 pm ]
Post subject:  Re: elbe 9/6/15

Thanks for the report guys. :cheers: I tried to get running in time but failed. Next time.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/